For all you lazy people here is the parts list:
For the Sands mod (if you only do one this is it)http://www.sandsmuseum.com/cars/elis…ace/index.html
Follow their install instructions / photos included
Purchased at Ace Hardwhere: cost $2.19
Bronze bushing
made by Jandorf
part# 90770
I.D 1/2″
O.D 11/16″
L 1 1/8″
Bolt needed: (same tread size as bolts holding down seat, just different length), also get a nice flat washer as well and use locktite
Bolt: M8 x 50 / 1.25 pitch
For the Sector 111 mod, i did not drill out the drivers side hole as i did not feel it was needed (and one less hole in the car) I however drilled out the passanger side which was empty and inserted a bolt up from the bottom of the car with a 2″ washer (stainless with silecone) and put a self locking nut on top.
http://sector111.com/images/products…structions.pdf
Feels like a new car…really
